
Novedad

Разработка конструкторской документации на Сушильный Барабан Ø2,6х17,5 м
Отделом Вращающихся печей разработана, согласована с Заказчиком и передана в изготовление конструкторская документация на Сушильный барабан Ø2,6х17,5 м, предназначенный для осушки смеси осадков.
Разработка конструкторской документации производилась в соответствии с требованиями и пожеланиями Заказчика. Сушильный барабан имеет косозубое зацепление, теплоизоляцию корпуса, внутренние устройства. Применен новый тип графитового уплотнения.
Разработка конструкторской документации производилась в соответствии с требованиями и пожеланиями Заказчика. Сушильный барабан имеет косозубое зацепление, теплоизоляцию корпуса, внутренние устройства. Применен новый тип графитового уплотнения.

Разработка рабочей конструкторской документации на Барабан-кондиционер Ø2,2х6 м
Для нашего постоянного клиента Отделом Вращающихся Печей разработана, согласована с Заказчиком и передана в изготовление рабочая конструкторская документация на Барабан-кондиционер Ø2,2х6 м. Барабан-кондиционер предназначен для обработки минеральных удобрений кондиционирующей добавкой.
Разработка конструкторской документации производилась в соответствии с требованиями Заказчика. По просьбе Заказчика в конструкцию барабан-кондиционера добавлена установка форсунок. Одна форсунка основная, вторая – резервная.
Разработка конструкторской документации производилась в соответствии с требованиями Заказчика. По просьбе Заказчика в конструкцию барабан-кондиционера добавлена установка форсунок. Одна форсунка основная, вторая – резервная.

Разработка рабочей конструкторской документации на дробилку М-20-30Г.
Отделом дробильного оборудования разработана, согласована и передана в изготовление рабочая конструкторская документация на дробилку М-20-30Г. Дробилки молотковые с диаметром ротора 2000 мм и длиной 3000 мм предназначены для дробления хрупких материалов: каменного и бурого угля, каменной соли, мела, гипса, известняка, некоторых руд и других малоабразивных материалов с влажностью, при которой не происходит замазывание колосниковых решеток. Все технические характеристики соответствуют требованиям заказчика и ГОСТ 7090-72.

Разработка конструкторской документации на емкостное оборудование R-109, R-110, R-112, V-455, Е-1.
В соответствии с эскизами, разработана, согласована с заказчиком и передана в изготовление конструкторская документация на 5 единиц емкостного оборудования R-109, R-110, R-112, V-455, Е-1
Novedad

EPC contract for a 3x10m complete lime cooler.
Shipment of a complete 3x10m lime cooler (weight is more than 121 tons) has been completed for one of the Cemeq key customers.
Taking into account Customer request to meet the schedule for the main production reconstruction - the design, manufacture and delivery of the lime cooler were performed as soon as possible: within five calendar months.
The next step in the execution of the EPC contract is installation supervision.
work under the contract (commissioning and signing of the Acts) is scheduled to be completed in September 2023.
Taking into account Customer request to meet the schedule for the main production reconstruction - the design, manufacture and delivery of the lime cooler were performed as soon as possible: within five calendar months.
The next step in the execution of the EPC contract is installation supervision.
work under the contract (commissioning and signing of the Acts) is scheduled to be completed in September 2023.

Manufacturing of components and spare parts for the partners of CEMEQ Group of Companies in June 2023.
A number of components and spare parts of various machines and industrial units were manufactured and delivered to the partner enterprises:
- support blocks for the sintering furnace (2 pieces);
- support rollers for the sintering furnace (6 pieces);
- spare parts for mining and processing equipment;
Design documentation was worked out by the specialists of the Research Institute CEMEQMASH and agreed with the Customer.
The equipment is manufactured under the supervision of the Quality Control Department staff.
- support blocks for the sintering furnace (2 pieces);
- support rollers for the sintering furnace (6 pieces);
- spare parts for mining and processing equipment;
Design documentation was worked out by the specialists of the Research Institute CEMEQMASH and agreed with the Customer.
The equipment is manufactured under the supervision of the Quality Control Department staff.

Production and supply of the cone for the fine cone crusher – 1750.
As a part of the scheduled repair of the main processing equipment, a cone for the fine cone crusher – 1750 was supplied to our permanent partner.
Cemeq Minerals LLC manufactures 2200, 1750, 1200 secondary cone crushers / fine cone crushers and spare parts for them according to its own engineering, we also provide erection, repair and maintenance services for them.
Cemeq Minerals LLC manufactures 2200, 1750, 1200 secondary cone crushers / fine cone crushers and spare parts for them according to its own engineering, we also provide erection, repair and maintenance services for them.

Delivery of 4 2.8x8 Granulators has been complete.
As a part of the sintering production complete modernization project, we have supplied four 2.8x8m granulators to our Customer.
The contract provides for the supply and installation supervision of the equipment, delivery obligations have been completely performed.
The first granulator was installed and successfully passed warranty tests.
The granulator original design provides the possibility to adjust drum inclination angle in the range of 1-5 degrees, that allows to set the most optimum operation mode.
The equipment design documentation was carried out by the specialists of the CEMEQMASH Research Institute in accordance with the individual requirements of the Customer.
The design documentation for the equipment was developed by the specialists of the Research Institute "CEMEKMASH" in accordance with the individual requirements of the Customer.
The contract provides for the supply and installation supervision of the equipment, delivery obligations have been completely performed.
The first granulator was installed and successfully passed warranty tests.
The granulator original design provides the possibility to adjust drum inclination angle in the range of 1-5 degrees, that allows to set the most optimum operation mode.
The equipment design documentation was carried out by the specialists of the CEMEQMASH Research Institute in accordance with the individual requirements of the Customer.
The design documentation for the equipment was developed by the specialists of the Research Institute "CEMEKMASH" in accordance with the individual requirements of the Customer.
Novedad

EPC contract for a 3x10m complete lime cooler.
Shipment of a complete 3x10m lime cooler (weight is more than 121 tons) has been completed for one of the Cemeq key customers.
Taking into account Customer request to meet the schedule for the main production reconstruction - the design, manufacture and delivery of the lime cooler were performed as soon as possible: within five calendar months.
The next step in the execution of the EPC contract is installation supervision.
work under the contract (commissioning and signing of the Acts) is scheduled to be completed in September 2023.
Taking into account Customer request to meet the schedule for the main production reconstruction - the design, manufacture and delivery of the lime cooler were performed as soon as possible: within five calendar months.
The next step in the execution of the EPC contract is installation supervision.
work under the contract (commissioning and signing of the Acts) is scheduled to be completed in September 2023.

Maintenance and repair service of the processing equipment in the 1st quarter of 2023.
For one of the strategic partners (cement production), the following work has been completed under a long-term contract for the repair and maintenance service of the processing equipment in the 1st quarter of 2023:
- compensating cut of a 4x125m rotary kiln №2 with geodetic support;
- 2.6x12m cement and raw mills repair, including units’ alignment and grinding of the mill trunnions;
- replacement of the raw mill №4 block of body shells with a length of 4 linear meters;
- maintenance of clamshell buckets;
-production of inter-chamber partitions and tanks.
The work performed within the terms agreed with the Customer, by qualified staff with proper tools.
- compensating cut of a 4x125m rotary kiln №2 with geodetic support;
- 2.6x12m cement and raw mills repair, including units’ alignment and grinding of the mill trunnions;
- replacement of the raw mill №4 block of body shells with a length of 4 linear meters;
- maintenance of clamshell buckets;
-production of inter-chamber partitions and tanks.
The work performed within the terms agreed with the Customer, by qualified staff with proper tools.

Technical re-equipment of the filtration section.
Our company is now taking part in a technical re-equipment of the filtration section project for one of the main workshops of a large Russian enterprise.
The company’s scope of work includes the design, supply and installation of two sets of pulp tanks with mixers and drives.
At the first stage, detailed design documentation for the equipment further manufacturing was implemented by the engineering department.
At the moment, the equipment assembly and installation process are being in progress. All work at the facility is performed according to the schedule.
The company’s scope of work includes the design, supply and installation of two sets of pulp tanks with mixers and drives.
At the first stage, detailed design documentation for the equipment further manufacturing was implemented by the engineering department.
At the moment, the equipment assembly and installation process are being in progress. All work at the facility is performed according to the schedule.

Cooling drum overhaul maintenance.
For one of the chemicals manufacturers in the Voronezh region, CEMEQ LLC performed an overhaul of the cooling drum with a diameter of 2.8 m. The following work was completed as a part of the maintenance:
Replacement of a cooler body section made of heat-resistant steel (the length of the replaced section is 6 line meters).
Replacement of the crown gear and cooler cross-beams.
Replacement of the Cooler support roller.
Commissioning of the unit.
All range of works was completed by qualified Cemeq staff, sent to the place as quickly as possible, in order to prevent any failure to meet approved repair schedule.
All works were performed with high quality within the terms agreed by the Customer.
Replacement of a cooler body section made of heat-resistant steel (the length of the replaced section is 6 line meters).
Replacement of the crown gear and cooler cross-beams.
Replacement of the Cooler support roller.
Commissioning of the unit.
All range of works was completed by qualified Cemeq staff, sent to the place as quickly as possible, in order to prevent any failure to meet approved repair schedule.
All works were performed with high quality within the terms agreed by the Customer.
Acerca de la empresa
Activities
CEMEQ group is an engineering and manufacturing company that provides integrated solutions for projects of new construction and modernization of existing enterprises in such industries as:
- cement production;
- metallurgical production;
- Mining and processing production;
- Mining industry;
- lime burning;
- preliminary restoration of nickel and manganese ores;
- calcination of aluminum, bauxite, oxide, titanium;
- production of mineral fertilizers;
- direct restoration of chrome ores;
- production of carbon electrodes;
- burning of magnesite and dolomite;
- calcination of petroleum coke;
- processing production;
- production of expanded clay.
Contactos
г. Магнитогорск

Фактический адрес:
455021, Челябинская область, г. Магнитогорск, проезд Сиреневый, дом 39, офис 201.
Почтовый адрес:
455021, Челябинская область, г. Магнитогорск, проезд Сиреневый, дом 39, офис 201.
Приемная:
+7 (3519) 22-81-51
+7 (3519) 25-37-00
+7 (3519) 25-37-00
E-mail: office@cemeq.ru
Сервисные работы:
Контакты для поставщиков:
+7 (3519) 24-77-74
E-mail: omto@cemeq.ru
equipos, fabricados
según
la documentación
de construcción
CEMEQ
según
la documentación
de construcción
CEMEQ
Conception
Fabrication
Livraison
Montage
Service
Fabrication
Livraison
Montage
Service
- Cemeq Minerals
Связаться с нами
Спасибо за обращение
С вами обязательно
свяжется наш менеджер.
свяжется наш менеджер.